viking ski club
 

 

Work on Skip’s Hut


Work starts: Saturday, September 20. 
Other work days: September 21, September 27, October 4, 5 and 11.

Start time: 9am until about 4pm. It's a large project so any time you can give will be appreciated.

We'll see if we need more dates later on. Work consists of everything from digging in the muck to carpentry, so depending if there are a lot of people or not, there can only be so many people doing structure work at once so some may need to dig. Overall, it will be fairly labor intensive. Please bring ample water and food for the day, as well as snacks to keep you going. The clubhouse will be open.

A list of suggested equipment/tools to bring are as follows:
  • Shovels and pick axes
  • Sledge
  • Work belt with hammer, measuring tape, square, pencils, chalk line, etc...
  • Pry bar
  • Crow bar
  • Flat pry bar
  • Hydraulic jacks (preferably not trolley jacks)
  • Reciprocating saw(saw's all) with Demolition blades
  • Circular saw
  • Level
  • **Saw horses** (I have two but need at least another 4) VERY IMPORTANT!
  • Garden hoes(for mixing concrete on a piece of plywood)
  • Ratchet set
  • Drill and bits
  • Axe or hatchet
  • Quick clamps
  • Grinder with a metal blade (otherwise we'll use the saw's all)
  • Extension cord
  • Chain saw with oil and gas
  • A backpack to lug all your tools down with you. We will probably have access to the ATV and maybe the six wheeler, but best to be prepared.
Please bring anything else you think may be useful and identify all your equipment so as not to lose your stuff. There will be power for the electrical tools.

Please contact project coodinators Kayll Duff at kayllduff@hotmail.com or Dave Marshall at dmarshall1954@gmail.com if you have any questions.